龙盛官方论坛
正在验证会员信息...
sheet extruding machine,cup making machine,vacuum forming machine,cup printing machine,straw machine,plastic granulator,coiling machine,punching machine,crusher,cup stacking machine
立式、卧式、斜式、斜卧式四种三辊XBZD100/70-900斜式多层共挤片材机组
今日发帖数: 0|昨日发帖数: 0|帖子数: 2141|会员数: 200
版主: -
回复数量: 0
发表回复 发表主题
上一主题: DGW-7858 多工位热成型机 下一主题: 无
查看: 49 | 回复: 0
管理员 shiela
等级:
上将
发帖:
389/238
积分:
35647
经验值:
235604
上次发言:
08-29 13:41
收藏(0)PET vacuum pump Maintenance instructions 真空泵保养手册
维 护 说 明
Maintenance instructions
1、定期检查过滤器,更换滤布、滤网,定期给水箱换
水,时刻保持循环水的清洁
Check the filter regularly ,change the filter cloth, filter the net, change
water regularly to the water tank, and keep the circulating water clean
2、罗茨泵的换油周期为:首次在开机后 15 天,以后
每次最多不超过 30 天
The oil change period of the roots pump is: the first time after starting
up 15days, after each time not more than 30 days
3、必须定期(推荐 15 天)清洗罗茨泵转子表面的塑
料蒸汽结晶体
The plastic vapor crystals on the surface of the rotz pump must be
cleaned regularly (15 days recommended)
4、罗茨泵停泵时正常油位应在油镜的 3/4 处,油杯必
须长期有油
The normal oil level should be at 3/4 of the oil mirror when the rotz
pump stops pumping , and the oil cup must have oil for a long time
5、罗茨泵的油含有水分、其它杂质或油质变差时,必
须及时更换,使用 100#真空泵油
The oil in the rotz pump contains moisture, other impurities or thequality of the oil has deteriorated, must be replaced in time, using
100#vacuum pump oil
6、禁止颗粒、液态水分从吸入口进入罗茨泵
the particle and liquid water are forbidden from entering into the roots
pump
7、罗茨泵的加油、放油螺丝必须要拧紧
The refueling screws and the oil drain screws of the rotz pump must be
tightened
8、保证水箱有良好的换热效果,水箱水温不得超过
40℃
Ensure that the water tank has a good heat exchange effect,and the
water temperature of the tank must not exceed 40 degrees
9、严禁更改电箱上真空开关的设置或人为强制启动
罗茨泵
It is strictly forbidden to change the setting of vacuum switch on the
electric box or force the rotz pump to be started
10、保持机器通风干燥环境
Keep the machine ventilated and dry

送花(0)臭鸡蛋(0)引用回复2021-08-29 13:41 [1楼]
上一主题: DGW-7858 多工位热成型机 下一主题: 无
回复: 0
发表回复
您需要 登录注册 后才可以回帖