龙盛官方论坛
正在验证会员信息...
sheet extruding machine,cup making machine,vacuum forming machine,cup printing machine,straw machine,plastic granulator,coiling machine,punching machine,crusher,cup stacking machine
立式、卧式、斜式、斜卧式四种三辊XBZD100/70-900斜式多层共挤片材机组
今日发帖数: 0|昨日发帖数: 0|帖子数: 2094|会员数: 200
版主: Tina
回复数量: 0
发表回复 发表主题
查看: 618 | 回复: 0
管理员 shiela
等级:
上将
发帖:
384/232
积分:
35625
经验值:
235577
上次发言:
12-02 16:25
收藏(0)720*420II thermoforming machine

720*420II thermoforming machine

1. Feeding, clamping mould,stretching and forming are controlled by advanced hydraulic and pneumatic technology.

2. Features of the machine is steady running, powerful action, efficiency and saving energy,etc.

3. Heating cabinet is consist of 12lines heating tiles, which distribute reasonable and heating more even.

4. The machine has the advantage of widely use, stable operation, low noise, reliable running and high quality of finished products,etc.

II. Technical parameter:

Model

ZDY-720II

Total power

≤90kw

Forming area

720mm×420mm

Air pressure

0.6-0.8mpa

Forming depth

≤125mm

Air consumption

2000L/MIN

Forming speed

≤16-28moulds/min

Water supplier

≤0.5M3/H

Sheet

≤720mm,thickness 0.3-1.8mm

Machine dimension

3470mmx1670mmx2700mm

Applicable material

PP,PS,PE,PET HIPS,PVC

Total weight

6.5 tons

III. Machine component

1.  Main machine part                         1unit

2.  Heating cabinet                            1unit

3.  On-line rewinding sheet                 1unit

4.On-line feeding sheet                    1unit

5.  Stainless shield                           1pcs

IV. Main Configuration of the machine

Motor of oil pump

Jiangsheng/Jiangmen

Motor of feeding/

Motor of frequcy converter

Dongli/Taiwan

Fuji/Japan

Motor of winding sheet

Supror/Zhejiang 

Stretching valve

SMC/Japan

Temperature contrlled meter

Fuji/Japan

Pneumatic magnetic valve

SMC/Japan

Cylinder

AirTac

Stretching cylinder

AirTac

Heating tiles

Dongli/Jiangsu

Temperature control module

Gmax/Xiamen

Proximity switch

Omron/Japan

Button

APT/Shanghai

PLC

Mitsubishi/Japan

Touch screen

Weinview/Taiwan

Hydraulic valve

Dongfeng/Taiwan

Hydraulic pump

Yuci

V. Other detail of the machine

1. The machine frame is welded by 100#and 120# steel tank, which has reasonable structure.

2. Upper and lower mould plate we use nodular cast iron(QT500-7),which has strong rigidity and high impact resistance.

3. Movement of upper and lower mould plate is guided by 4pillars and pillar guide,which has strong guide, machine stable running and increase using life of cutters.

4. Material of pillars is 40Cr steel, which is plated hard chrome and grinded as mirror.

5. Transmission of feeding uses motor from Taiwan Dongli, which has the advantage of accurate feeding,strong power and stable performance.

6. Feeding caterpillars use 4/8” double-row chains with tooth,cooling with stainless tube.

7. Heating cabinet uses stainless steel plate, with upper and lower heating. Heating tiles are ceramic from Jingsu. Insulated device outside the heating box,which can save power. And upper and lower heating cabinets are automatically move pulling by cylinder.

8. Heating way: upper and lower total symmetry 12lines.

9. Forming and stretching cylinder is Ø160×125mm, fast speed,can improve transparency and evenness.

10. Clamping mould and automatic punching use the principle of injection,the hydraulic cylinder driving the Linkage device to do fluctuate transmission,which can reach 180mm,fast and low noise, high output. Oil tank uses imported sealing ring,connecting rod is consisted by nodular cast iron with inner 38crmoA1A steel bushing and steel shaft,which high resistance and long using life.

11. Winding sheet uses on-line winding, mainly wind the waste sheet that punching from producing.

12.Power of worm gear reducer motor is 0.37kw.

13. Two lubricating pump supply respectively to five fulcrums and four guiding pillars.













图片列表 - 点击可放大
送花(0)臭鸡蛋(0)引用回复2018-01-27 22:39 [1楼]
回复: 0
发表回复
您需要 登录注册 后才可以回帖